no..it doesnt seem to be pushin it at all..
| Hall GTC Forum https://hallgtc.com/forum/ |
|
| fast https://hallgtc.com/forum/viewtopic.php?f=3&t=109 |
Page 1 of 1 |
| Author: | rareair1 [ July 24th, 2014, 12:09 am ] |
| Post subject: | fast |
this thing is fast i had it up to 70 no problem...pedal to spare...i need something lik a hitch on the back and pull a small car! |
|
| Author: | windymatt [ July 25th, 2014, 5:33 pm ] |
| Post subject: | Re: fast |
That could be pushing it RPM-wise. Do you have a tach? |
|
| Author: | rareair1 [ July 26th, 2014, 4:08 pm ] |
| Post subject: | Re: fast |
no..it doesnt seem to be pushin it at all..
|
|
| Author: | windymatt [ July 27th, 2014, 11:35 am ] |
| Post subject: | Re: fast |
5,000 RPM is about max for a 360 with cast iron crank from everything I've heard. A 318 with forged crank is capable of higher revs without problems, but the real limiting factor is the possibility of valvetrain issues at sustained high engine speeds - unless, of course, you have a modified version with roller lifters, balanced crank and etc. The other potential problem is excess exhaust temps cracking the manifold(s), which is pretty common with these engines. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|