I've seen different style and locations for the holding tank gauges in the Hall GTC. Mine is next to the entry door on the wall separating the bedroom from the front.
| Hall GTC Forum https://hallgtc.com/forum/ |
|
| Show us your tank gauges https://hallgtc.com/forum/viewtopic.php?f=3&t=190 |
Page 1 of 1 |
| Author: | NicksGarage [ April 8th, 2018, 3:05 pm ] |
| Post subject: | Show us your tank gauges |
I've seen different style and locations for the holding tank gauges in the Hall GTC. Mine is next to the entry door on the wall separating the bedroom from the front.
|
|
| Author: | NicksGarage [ April 8th, 2018, 3:06 pm ] |
| Post subject: | Re: Show us your tank gauges |
This one has a Hall GTC branded panel above the stove. 
|
|
| Author: | NicksGarage [ April 8th, 2018, 3:07 pm ] |
| Post subject: | Re: Show us your tank gauges |
I think this is a different style panel on the top left. 
|
|
| Author: | NicksGarage [ April 8th, 2018, 3:09 pm ] |
| Post subject: | Re: Show us your tank gauges |
This one looks like it has a weather station. 
|
|
| Author: | windymatt [ April 11th, 2018, 1:00 pm ] |
| Post subject: | Re: Show us your tank gauges |
I seem to have forgotten how to attach images. For some reason there's no "attach" function, or none that works with Windows 10... ? I replaced my dreadfully inaccurate original level gauge with a See level II system that uses an external circuit strip instead of the potentiometer system. Way better! |
|
| Author: | NicksGarage [ April 11th, 2018, 1:20 pm ] |
| Post subject: | Re: Show us your tank gauges |
windymatt wrote: I seem to have forgotten how to attach images. For some reason there's no "attach" function, or none that works with Windows 10... ? I replaced my dreadfully inaccurate original level gauge with a See level II system that uses an external circuit strip instead of the potentiometer system. Way better! You have to use the "Post Reply" button and not the Quick Reply box to get the attachment tool. I know your rig had the same gauge panel as mine originally. |
|
| Author: | windymatt [ April 11th, 2018, 1:41 pm ] |
| Post subject: | Re: Show us your tank gauges |
"File too big" |
|
| Author: | NicksGarage [ April 12th, 2018, 9:11 am ] |
| Post subject: | Re: Show us your tank gauges |
That's what she said... |
|
| Author: | windymatt [ April 14th, 2018, 9:54 am ] |
| Post subject: | Re: Show us your tank gauges |
 "Sorry, the board attachment quota has been reached". Aargh!
|
|
| Author: | NicksGarage [ April 16th, 2018, 8:56 am ] |
| Post subject: | Re: Show us your tank gauges |
I increased the quota. |
|
| Author: | NicksGarage [ April 16th, 2018, 9:02 am ] |
| Post subject: | Re: Show us your tank gauges |
Here's your old tank gauges, did you put the new ones in the same spot? 
|
|
| Author: | windymatt [ April 16th, 2018, 2:32 pm ] |
| Post subject: | Re: Show us your tank gauges |
That I did..... I'll email a shot and maybe you can shrink the file enough for it to fit. The original 70's electronics, while in keeping with the period, are really horribly inaccurate, which is why I converted to the See Level II. The original tank probe is inaccurate because it relies on a specific resistance between the immersed anodes, but when the mineral content of the water is higher or lower than the design "norm", the readings are bogus. The external sending unit of the See Level doesn't care and works identically with any liquid in the tank. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|