turns out to be transmission mount bushing ..keeps driveline steady under there 5.65$ part:)..i guess its old
| Hall GTC Forum https://hallgtc.com/forum/ |
|
| front end https://hallgtc.com/forum/viewtopic.php?f=4&t=99 |
Page 1 of 1 |
| Author: | rareair1 [ May 4th, 2014, 10:03 pm ] |
| Post subject: | front end |
something broke or came loose in the front suspension making a fairly significant banging noise over bumps ...visually only thing i could see was maybe a rod of somekind running lengthwise to the body that popped out of its bracket ..or broke dunno...im afraid to drive it...may have to have it towed or have someone take a look...or keep investigating |
|
| Author: | rareair1 [ May 5th, 2014, 8:37 am ] |
| Post subject: | Re: front end |
turns out to be transmission mount bushing ..keeps driveline steady under there 5.65$ part:)..i guess its old
|
|
| Author: | NicksGarage [ May 5th, 2014, 3:41 pm ] |
| Post subject: | Re: front end |
Also might want to check the center support for the driveshaft while you're under there. Glad the original issue was something easy. Sent from my HTC One M8 via Tapatalk 4 Pro |
|
| Author: | rareair1 [ June 10th, 2014, 3:37 pm ] |
| Post subject: | Re: front end |
anyone had any experience with the coil springs...i have had trouble with finding springs that match the originals the springs on there now are about 15 inches free...and compress to about 13 inches...all springs i could find are about 13 inches and compres down to 11inches...could make tires a problem...with clearance issues...anyone have original part # or info may be helpful |
|
| Author: | NicksGarage [ June 10th, 2014, 4:45 pm ] |
| Post subject: | Re: front end |
What vehicle are you looking them up under? Sounds like ones for a B300. Looking at RockAuto.com, they don't seem to list springs for the early motorhome chassis. I looked at a '79 CB300 with a 440 engine and they have springs that are closer to what you're looking for. I'm pretty sure they would fit your rig if that's the height of springs you have now if you look at the interchange information. I don't know if Matt changed his springs or not. |
|
| Author: | rareair1 [ June 10th, 2014, 6:25 pm ] |
| Post subject: | Re: front end |
yes they have listings for early model b300 74.73 but all are the same size really...ill ask mechanic about interchanging:) |
|
| Author: | pepper671 [ July 13th, 2020, 8:39 pm ] | |||
| Post subject: | Re: front end | |||
Has anyone tried to replace the front bump stops ? I notice mines been bottoming out and I looked and see the bump stops look kinda soft and on the passenger side the metal where the top bumps onto is bent up.
|
||||
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|